- We have designed this system to produce permeate flow 500 Liters per hour.
- Maximum TDS Level of Raw Water (input) upto 2200 ppm.
- The treated water quality as required i.e pH 7-8 after correction ,TDS <100 PPM & Hardness < 50 PPM can be achieve , subject to the feed water quality is the same as specified above .In case of any change in the quality of raw water it may have implication on operating parameters or on end results of the system.
- The system of recovery is properly maintained corresponding to the raw water TDS.
- RO feed water limiting conditions as mentioned below are strictly maintained,
Waterloop 500LPH RO Plant
TECHNICAL DETAILS
Row water feed pump
Type : Monoblock Centrifugal
Material of Construction : C.I
Make : CRI , Kirloskar
Drive motor : SinglePhase
Sand Media Filter
Working : Down flow
Max flow rate : 3m3/hr
Min. flow rate : 0.5 m3/hr
Working pressure : 1.5 – 3.5 kg/cm2
Size : 10”X54”
Make : Pentair
Valves : Multiport valve 25mm
Carbon Filter
Working : Down flow
Max flow rate : 3m3/hr
Min.flow rate : 0.5m3/hr
Working pressure : 1.5 – 3.5 kg/cm2
Size : 10”X54”
Make : Pentair
Valves : Multiport valves 25mm
MICRON CARTRIDGE FILTER
Quantity : 1 sat
Flow rate : 3m3/hr
Rating : 10 micron
Make : Filtech / USF
CARTRIDGE HOUSING
Quantity : 2 nos.
Make : Polycarbonate
High Pressure Pump
Type : Multistage Centrifugal
Make : CRI/shakti
Drive motor : Single Phase
Model : CDL- 2-18
Membrane Housing Type : FPR
PSI : 250
Make : ALFA, Imp
Size : 4080 E2
MEMBRANE
Type : High Rejection Brackish water
Membrane : CSM /hi-tech/Vontron
Modal : 4040
Size : 40” x 40”
Rejection : 99.3% Max.
FLOW METER
Quantity : 2 nos.
Type : Glass Tube Rota materMake : Flow max, IMP